Item shown may not be actual product.
Product and price information are subject to change without notice.

$35,442.00 *
*log in for dealer pricing

14K Short Bay Scissor Alignment Flush Mount

Item Number: EELR588APKG Supplier: JOHN BEAN

Description

John Bean Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.

Features

14,000 lb. lifting capacity
Open front and rear access between lifting platforms
Low profile height with long approach ramps easing drive on
Wide drive on runway platforms improves ease of vehicle positioning
Recessed front turn plate pockets and full floating rear slip plates give a uniform surface for alignment
Maintenance reduced rear slip plates use oversized encapsulated bearings, roll upward protected from environment debris
Re-enforced scissor / base structure and runway platforms improves alignment accuracy
Multi-position work step provides comfortable under hood access
4 hydraulic cylinders, cross aligned arrangement provides secure lift power and added safety
Contained top and bottom durable steel re-enforced glide blocks deliver smooth lift operation
Up to 18, level locking locations improves ergonomic working positions
Approach ramps are equipped with end sliders minimizing noise and reducing floor damage
Adjustable maximum lift height, suiting locations with low ceilings
Safety systems include:
- Mechanical locking with pneumatic safety lock release form control console
- Flow sensing valves in hydraulic control circuit
- Redundant hydraulic safety system with cross aligned hydraulic circuits
- Integrated hydraulic fuse protection, preventing inadvertent lowering in the event of a hydraulic line leak
- Lock pins to secure against slip plate movement when loading/unloading vehicles
- Wheel chocks, front wheel stops and self-activating rear wheel stop preventing roll offs
Integrated air kit allows unrestricted clear access for operation of rolling jacks
On-board FRL; (Filter, Regulator, Lubricator) provides clean and lubricated air, reducing maintenance and protecting pneumatic
All models have been tested and validated by an independent third party to the ANSI/ALI automotive lift standard, ALCTV-2011

Includes

Complete 14K scissor Console / LL console
Work Step
14K Steel Line Cover Kit
2 Rolling Jack Beams, EELS904A
Premium Templates, EAK0289J06A
Rollback Paddle Kit, EAK0277J28A

Warranty

One year

Product Specifications

Adapter Length Range: 36-3/4" to 43" (921 mm to 1092 mm)
Air Supply Requirements: 90-140 PSI @ 5-10 CFM
Base Width: 32-1/4" (819 mm)
Configuration: Open Front and Rear
Console Dimensions: 16.37" x 12" x 45-3/4" (420 x 307 x 1162 mm)
Four-Wheel Alignment Wheelbase: 88" (2235 mm) - 155" (3937 mm)
General Service Wheelbase: up to 179" (4547 mm)
Hydaulic Oil Capacity: Tank Size: 4.0 gal. (15L) / Lift Capacity: 6.0 gal. (22.7L)
Hydraulic Oil Type: ISO 32 (10 weight) non-foaming and non-detergent hydraulic oil
Lifting Capacity: 14,000 lbs. (6,350 kg)
Lifting Time: 85 seconds
Maximum Arm Reach for Jack Beams: 57-1/8" (1450 mm)
Maximum Lift Height: 72" (183cm)
Maximum Operating Pressure: 4600 PSI (31.7 MPa)
Minimum Arm Reach for Jack Beams: 35-7/16" (900 mm)
Minimum Drive Over Height With Pad Arm Retracted: 1-7/8" (47.5 mm)
Minimum Lowered Height: 10" (254 mm)
Minimum Pad Height Arm Extended: 2-9/16" (65 mm)
Overall Height: 72" (183cm)
Overall Length: 256.19" (6507 mm)
Overall Width: 93" (235cm)
Pneumatic Filtration Oil Type: Snap-on # IM6 or Equivalent
Power Requirements: 230V, 60Hz, 1Ph, 20A, 2HP (1.5kW)
Runway Width: 26" (660 mm)
Two-Wheel Alignment Wheelbase: up to 165" (4191 mm)
Width Between Runways: 39" (990 mm) - 40" (1016 mm)

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.