search
Honda Dealers: Please enter the site from the iN or eMall system for dealer specific content and pricing
product
product Item shown may not be actual product.
Product and price information are subject to change without notice.
Discontinued
Superseded to ATECH3FR250A

1/2" Drive Electronic Angle Torque Wrench


Item Number: ATECH3FR250    Supplier: SNAP-ON TOOLS

Description

 

Snap-on® TECHANGLE™ electronic torque and angle wrenches are designed to provide basic electronic features, including Units Conversion, Track, Peak Hold, and Preset functions on a robust, yet ergonomically comfortable, wrench platform. The Angle mode utilizes piezoelectric gyroscope technology that requires no mechanical reference.

 

 

TECHANGLE™ eliminates the need for angle gauges and protractors and provides the fastest and most accurate way to achieve torque plus angle tightening sequences. The digital readout shows torque setting, and then changes to the follow-up angle desired. Angle calculation is based on the same gyroscope technology that keeps helicopters flying level.

 

 

Features

 

  • Torque Accuracy: 2% clockwise (CW), 3% counter-clockwise (CCW) from 20-100% full scale (FS); 4% CW, 6% CCW from 10-19% FS; 8% CW, 10% CCW from 5-9% FS

     

     

  • Angle Accuracy: ± 1% of reading ± 1°@ angular velocity >10°/sec <180°/sec

     

     

  • Display Resolution 1°

     

     

  • Manual Preset and automatic Track and Peak Hold modes

     

     

  • Torque Units Conversion, N.m, ft.-lb., in.-lb.

     

     

  • Audible (tone) and Tactile (vibrating handle) Preset Alerts

     

     

  • Display Resolution 0.1 ft.-lb., 0.1 N.m, 1 in.-lb.

     

     

  • Each button has only one function (power on, preset increase, preset decrease, unit of measure select)

     

     

  • Comfortable, non-slip grip handle

     

     

  • Stand on handle bottom keeps tool from rolling off flat surface

     

     

  • Sealed Flex head ratchets move ± 15°

     

     

  • Three AA alkaline cells for battery power allow for up to 40 hours continuous operation

     

     

  • Low battery indicator

     

     

  • Auto shut-off after 2 minutes idle

     

     

  • Designed to withstand shocks without failure

     

     

  • Splash proof, protects against water and most automotive shop fluid

     

     

  • ISO-6789-2003 and ASME B107-28-2005 Standards compliant

     

     

  • Certificate of NIST traceability for 20% to 100% of full scale

     

Includes

  • TECHANGLE™ wrench
  • EU/CE-DE, ES, FR, IT, NL, PT, UK and Japanese Language manual
  • Certification of accuracy
  • Storage case

NOTE:  TECHANGLE™ wrenches are calibrated at the factory using angular displacement and torque measurement instruments that are traceable to the National Institute of Standards and Technology (NIST). Torque parameters comply with ISO 6789-2003 and ASME B107-28-2005. No U.S. or International Standards exist for angle wrenches.

 

Warranty

One year

Product Specifications

  • Angle Range: 5-360°
  • Gear action: 10°
  • Gear teeth: 36
  • Head depth: 3/4"
  • Head type: Sealed flex head
  • Head width: 1-5/8"
  • Housing color: Grey
  • Humidity: up to 90% non condensing
  • Length: 26"
  • Operating temperature: 40-110°F (5-42°C)
  • Range, ft.-lb.: 12.5-250
  • Range, in-lb.: 150-3,000
  • Range, N•m: 17.5-340
  • Square drive: 1/2"
  • Storage temperature: 0-122°F (-20-50°C)
  • Weight: 3.7 lbs.

  • Over-torquing can cause breakage. Force against flex stops on flex head can cause head breakage. An out-of-calibration angle wrench can cause part or tool breakage.
  • To avoid damaging the wrench, never use the wrench with the power off. Always turn ON the wrench so the applied torque is being measured.
  • Do not press ON/RESET while torque is applied or while the wrench is in motion.
  • Never use this wrench to break fasteners loose.
  • Do not use extensions, such as a pipe, on the handle of the wrench.
  • Before each use, check that the wrench capacity matches or exceeds each application.
  • Verify calibration if the wrench is dropped