Item shown may not be actual product.
Product and price information are subject to change without notice.

*log in for dealer pricing

10K Versymmetric Two-Post Lift - 2 ft. Extended Height w/ EV Adapters

Item Number: CLFCL10V32EV Supplier: CHALLENGER LIFTS INC

NOTE: Buyer must specify if lift should be shipped to their installer or the buyer's location.
If shipping to installer, buyer must provide installer's SHIP TO address, contact name and phone #.
Buyer must arrange to have a forklift on-site to unload the lift if shipment is being sent directly to buyer's location.

Description

10,000 lb. Verysmmetric® 2-Post Lift with Offset Front Arms and Three-Stage Rear Arms - 2 ft. Extended Height w/ EV Adapters

Challenger's ALI/ETL Certified Versymmetric® Two-Post Lifts maximize your revenue potential by having the flexibility to raise vehicles both symmetrically and asymmetrically in a single service bay. 10,000 lb. Versymmetric® Two-Post automotive lifts can accommodate just about anything that comes in for service and are equipped with one of three Versymmetric® arm configurations.

Features

Double your service capabilities! Heavy-duty arms are specially engineered to lift vehicles both true symmetrically and asymmetrically to increase a bay's servicing flexibility and revenue potential.

An overhead non-load bearing cable equalization system and small base plate leaves the floor clear so tools can be moved easier and minimizes floor obstructions.

Technicians can save valuable time by disengaging both column locks at the same time with our single point mechanical lock release system.

User friendly arm restraints automatically disengage when lift is fully lowered for easy positioning of arms and securely engage when lifts is raised.

Adjustable arm restraint shafts compensate for uneven floors.

Grease fittings located on arm pin bushings minimize corrosion to keep arms swinging freely.

48" elongated carriage design decreases load on bearing.

Heavy-duty 5" diameter pulley and 5/16" cable reduces stress on equalization system and increases cable life.

Fully gusseted base plate design reduces column deflection.

Padded overhead shut off system prevents vehicle damage from being raised too high.

Rubber door guards protect vehicles from door damage when accessing driver controls.
Must specify color at time of order. Available in Red, Blue or Black

Includes
CLFPB2270 Premium Double-telescoping Polyurethane Screw Pads, Standard for Challenger 10,000 lb. Capacity 2-Post and Inground Lifts
CLFTFPK Electric Vehicle Footpad Kit - designed to give a flat lifting surface (Set of 4). Required for Electric Vehicles.
Accessories

CLF10313   (2) 6" Stack Adapters

CLF10315   Stack Adapter Kit

Warranty
Click here for warranty information.

Product Specifications

Adjustable Width Overall: 11'6.5" - 11'11"

Ceiling Height Required: 11'11" / with 2' Extension: 13'9" / with 3' Extension: 14'9"

Cylinder Overall (Full Stroke): 11'11"

Drive-Thru Clearance: 100" / 104.5"

Floor to Overhead Switch: 10' 8-1/2" or 11' 2-1/2" / with 2' Extension: 12' 8-1/2" or 13' 2-1/2"/ with 3' Extension: 13' 8-1/2" or 14' 2-1/2"

Front Arm Reach - Min / Max: 20" / 42"

Inside Columns: 110" / 114.5"

Lifting Capacity: 10,000 lbs.

Low Lock Height: 12" Net Rise

Max Load per Arm: 2,500 lbs.

Motor / Voltage (Single Phase standard) - Standard : 2HP, 208-230V

Motor / Voltage (Single Phase standard) - with Quick Cycle option: 3HP, 208-230V

Overall Height: 11'2" or 11'8" / with 2' Extension: 31'2" or 13'9" / with 3' Extension: 14'2" or 14'8"

Rear Arm Reach - Min / Max: 37.625" / 60"

Rise Height (measured including tall 6" stack adapters): 74.125"

Screw Pad Height - Min / Max: 3.875" / 6.125"

Speed of Rise: 38 Seconds

For more information see the BEV Required Equipment document which can be accessed via iN (SERVICE > Service Bay > BEV Required Equipment).

Serial Number Verification

The item you are attempting to add to your cart requires a serial number verification first. Please enter the Key Machine serial number below to continue.

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.