Item shown may not be actual product.
Product and price information are subject to change without notice.

Discontinued
Superseded to EELR589APKG

14K Locked & Lighted Short Bay Alignment Lift Surface Mount

Item Number: EELR589A Supplier: JOHN BEAN

Description

John Bean Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts. Locked and Lighted models provide productivity enhancements while allowing the technician to perform critical tasks while minimizing alignment process operations, by illuminating both inspection and adjustment areas and by sequencing the locking of alignment plates.

Features

14,000 lb. lifting capacity
Open front and rear access between lifting platforms
Low profile height with long approach ramps easing drive on
Wide drive on runway platforms improves ease of vehicle positioning
Recessed front turn plate pockets and full floating rear slip plates give a uniform surface for alignment
Maintenance reduced rear slip plates use oversized encapsulated bearings, roll upward protected from environment debris
Re-enforced scissor / base structure and runway platforms improves alignment accuracy
Multi-position work step provides comfortable under hood access
4 hydraulic cylinders, cross aligned arrangement provides secure lift power and added safety
Contained top and bottom durable steel re-enforced glide blocks deliver smooth lift operation
Up to 18, level locking locations improves ergonomic working positions
Approach ramps are equipped with end sliders minimizing noise and reducing floor damage
Adjustable maximum lift height, suiting locations with low ceilings
Safety systems include:
- Mechanical locking with pneumatic safety lock release form control console
- Flow sensing valves in hydraulic control circuit
- Redundant hydraulic safety system with cross aligned hydraulic circuits
- Integrated hydraulic fuse protection, preventing inadvertent lowering in the event of a hydraulic line leak
- Lock pins to secure against slip plate movement when loading/unloading vehicles
- Wheel chocks, front wheel stops and self-activating rear wheel stop preventing roll offs
- On models equipped with patented Locked and Lighted front turn plates and rear slip plates
  - On auto on/off Light feature ensuring no power when operation through hazard zones
  - Pneumatic locking of front and rear slip plates, with unloaded return to center feature
Integrated air kit allows unrestricted clear access for operation of rolling jacks
On-board FRL; (Filter, Regulator, Lubricator) provides clean and lubricated air, reducing maintenance and protecting pneumatic
Locked and Lighted equipped models:
- Have ease locking control activation form the lift control console, reduces walking and effort from resetting alignment pins in plates
- Locking components are made from corrosion resistant materials
- Lighted units, illuminate alignment adjustment and calibration areas with energy efficient LED’s, giving a wide viewing area of clean white light
- Front LED’s are mounted in the front turn plate base easily accommodating varying vehicle wheel tracks
- Rear LED’s are strategically positioned on the flush mounted rear slip plates auto on/off Light feature ensures no power when operating through hazard zones
All models have been tested and validated by an independent third party to the ANSI/ALI automotive lift standard, ALCTV-2011

Warranty

One year

Product Specifications

Console Dimensions: 16-1/2" x 14-1/8" x 45-3/4" (419 x 359 x 1162 mm)
Four-Wheel Alignment Wheelbase: 88" (2235 mm) - 155" (3937 mm)
General Service Wheelbase: up to 179" (4547 mm)
Hydaulic Oil Capacity: Tank Size: 4.0 gal. (15L) / Lift Capacity: 6.0 gal. (22.7L)
Hydraulic Oil Type: ISO 32 (10 weight) hydraulic oil
Lift Time (based on full load): 75 - 85 seconds
Maximum Capacity: 14,000 lbs. (6350 kg)
Maximum Operating Pressure: 4600 PSI (31.7 MPa)
Maximum Raised Height: 72" (1829 mm)
Minimum Lowered Height: 10" (254 mm)
Overall Length: 256.19" (6507 mm)
Overall Width (minimum / maximum): 92-1/2" (2350 mm) - 94-1/2" (2400 mm)
Pneumatic Filtration Oil Type: Snap-on # IM6 or Equivalent
Power Rating (at the lift): 230V, 1Ph, 60Hz, 20A
Runway Width: 26" (660 mm)
Two-Wheel Alignment Wheelbase: up to 165" (4191 mm)
Width Between Runways: 38" (965 mm) - 40" (1016 mm)

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.