Item shown may not be actual product.
Product and price information are subject to change without notice.

*log in for dealer pricing

Road Force Wheel Balancer with AutoClamp

Item Number: HUNRF20 Supplier: HUNTER ENGINEERING COMPANY

Description

Road Force® GSP9700 high volume LCD wheel balancer with exclusive tire/wheel assembly “road test” while mounted on the unit. Locates and eliminates virtually every cause of wheel vibration relating to the tire and rim. Includes AutoClamp® System.

Features

ForceMatch® feature allows tire and wheel assemblies to be optimized to provide best possible ride.
StraightTrak® Lateral Force Measurement (LFM) eliminates tire related pull problems by balancing lateral forces on the front axle.
SmartWeight® Balancing Technology improves and speeds balancing while reducing check spins and weight chasing.
TPMSpecs® software presents thousands of TPMS reset procedures in a comprehensive, tech-friendly format.
Centering Check® ensures proper centering and helps eliminate setup errors.
Servo activated BDC laser weight placement - "bottom-dead-center" laser speeds tape-weight placement and improves accuracy.
Auto-Inflation Station provides proper inflation pressure with convenient automatic controls.
Automatic Mode Detection eliminates the need to select the balance mode and reduce service time and possible mode entry errors.
Quick Cal-check verifies balancer calibration in seconds without the use of a reference wheel.
TranzSaver® compares tire circumferences as specified by OE's to prevent damage to AWD vehicles.
17" LCD monitor provides technicians easy to understand information.
AutoClamp® feature saves time and energy. Clamp adaptor is positioned and tightened automatically - there are no time consuming shaft threads to take-up and no additional wing nut to tighten.

Warranty

Call the Hunter Customer Service Department at 1-800-448-6848 for specific warranty information.

NOTE: Some dimensions, capacities, and specifications may vary depending on model, accessories, and tire and wheel configurations.

Product Specifications

Air Supply: 100-175 p.s.i. (7-12 bar)
ALU: 14" to 44" (356 mm to 1118 mm)
Balancing Speed: Variable RPM, direction and torque (0-300 r.p.m.)
Imbalance Resolution: ± 0.01 oz (0.28 g)
Maximum Tire Diameter: 40" (1016 mm)
Maximum Tire Weight: 175 lbs. (79 kg)
Maximum Tire Width: 20" (508 mm)
Motor: Programmable drive system and DC motor
Placement Accuracy: 512 positions, ± 0.35°
Power Requirements: 230V (+10%/ - 15%), 10A, 50/60 Hz, 1P (power cable includes NEMA 20 amp plug, l6-20P)
Radial & Lateral Runout Accuracy: 0.002" (0.051 mm)
Radial Force Measurement Accuracy: 2 lbs. 10N (1.0 kg)
Rim Diameter: 10" to 30" (254 mm to 762 mm)
Rim Width: 1.5" to 20.5" (38 mm to 521 mm)
Roller Force: Variable up to 1,250 lbs. (567 kg)
Shipping Weight: 641 lbs. (291 kg)

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.