![product](/FileServerRoot/CatManFiles/FilesPublished/EQS/Honda/Images/HUNRX10.jpg)
Product and price information are subject to change without notice.
RX-10L Lift Rack - Surface-Mount w/ PowerSlide Slipplates
THE RX10 SERIES LIFTS HAVE BEEN DISCONTINUED. THE SUGGESTED REPLACEMENTS ARE THE RX10-T SERIES LIFTS.
Description
RX Surface-Mount Scissor Rack (10,000 lb. Capacity/Long Deck)
with Air line kit, (2) 6,000 lb. Capacity Swing Air Jacks and PowerSlide Slipplates
The Hunter RX10 Lift features a 10,000-lb. lifting capacity and a choice of runway lengths to accommodate everything from passenger cars to the longest crew cab pickup trucks.The scissor design requires minimum bay space and can save further space with a shallow-pit installation that sets the runways flush to the floor when fully lowered, eliminating the need for long approach ramps.
Surface-mounted models provide a best-in-class lowered height of only 8.75 inches, providing clearance for vehicles with low ride height or low-hanging spoilers.
There are many RX-10 models available in surface-mount or flush-mount with various optional add-ons. For assistance in picking the right model for your service facility, call your program representative.
Features
- The RX10 improves productivity with timesaving features like the optional PowerSlide® system, which automatically controls turnplate and slipplate operation, and the optional Inflation Station feature, which speeds service and ensures more accurate alignments by automatically setting a predetermined tire pressure for each wheel simultaneously.
- The extra-wide 24" runways with louvered ramps prevent wheel spin in wet conditions and make positioning the vehicle on the lift rack easier. The open access at the front and rear create an unrestricted workspace underneath the vehicle.
- (2) Lightweight and movable work steps lock into 12 secure positions (surface-mount models only)
- Lifts feature safety locks at 16 height positions, offering a variety of working heights for the technician
- Complete operation from the console
- Velocity safety fuses with instantaneously shutdown in the event of hydraulic failure
- Sensor Feedback System aid in keeping the runway level and safely stops if an obstruction is detected
- Chromed pins and teflon bearings for long life
- Optional 6,000-lb. capacity swing air jacks add the capability of lifting vehicles off the runways during alignment procedures and other service operations.
- A powder coat finish gives the RX exceptional appearance and durability that is more resistant to damage that occurs in the shop environment.
- The RX10 also offers an integrated air line kit for tools and an optional runway lighting kit to illuminate the workspace under the vehicle.
Includes
- HUN51-1696-1 Two movable work steps (surface-mount models only)
- HUN512422PPP Front wheel stops
- HUN224422 (2) Wheel chocks
- HUN2016181 Air line kit
- HUN1471431PP Louvered ramps with built-in wheel stops
- Free-floating rear wheel slipplates
- PowerSlide slipplates
- (2) 6,000 lb. capacity swing air jacks
Options
- HUN2021731 AlignLights Accessory
Warranty
Call your Tool and Equipment Program representative for specific warranty information.
Product Specifications
- Air: 90-150 p.s.i.
- Alignment Height: All lock positions
- Lifting Capacity: 10,000 lbs.
- Lowered Height: 8.75" (222 mm)
- Maximum Lift Height: 72" (1829 mm)
- Maximum Wheelbase - General Service: 192" (4877 mm)
- Maximum Wheelbase - Two-Wheel Alignment: 179" (4547 mm)
- Minimum Four-Wheel Alignment: 88" (2235 mm)
- Motor: 208-230 VAC/60 Hz/26 Amps/1 PH
- Raise Time: 55 seconds
- Runway Width: 24" (609 mm)
- Tread Width - Maximum Outside: 88" (2235 mm)
- Tread Width - Minimum Inside: 40" (1016 mm)