Item shown may not be actual product.
Product and price information are subject to change without notice.

*log in for dealer pricing

Tire Changer (Auto34 with Wheel Lift and Mirror)

Item Number: HUNTCA34WBLK Supplier: HUNTER ENGINEERING COMPANY

Description

NOTE: This Tire Changer is PAX Compatible with the purchase of the optional Pax Upgrade Kit HUNRP6G10A73, which is sold separately and is listed below under Accessories.

The Hunter Auto34’s exclusive features operate in harmony to easily and safely change the world’s toughest new performance tires and wheels. Its intuitive controls allow for unmatched cycle times and a short learning curve. The leverless operation eliminates technicians straining to pull over tough beads, damage of beads with thick levers, and rim damage from lever during demounting.

Features

Leverless Tool Head – The ultra-thin, vertical shape of the tool head automatically slips easily between the rim and tire sidewall and extracts the bead gently in one fluid down and up motion without the use of bead levers. The slim head design and elimination of levers reduce tension on the bead and ease overall operation.
Diameter Control – The single diameter control arm adjusts the tool head and rollers to the correct diameter. No other adjustment is needed.
Simple Controls – Three switches and one foot pedal control virtually all the tire changing operations.
Simple Clamping – The center support clamping table and self-centering quick clamp provide the flexibility to easily mount a variety of wheel designs up to 34” in diameter. With three easily adjustable clamping heights, no flange plates are needed for most reverse wheels. The rubber cover protects expensive wheels from damage.
Blast Inflation – Handheld nozzle allows operator to direct a large burst of compressed air exactly where needed to easily seat the bead. A compression trigger and foot pedal protect the operator from accidental discharge.
Bead Loosening Roller Auto Indention – The roller system gently rolls the tire off or on the rim, yet is strong enough to hold the tire securely for safe match-mounting. A sensor on the bead loosening roller detects when the roller is under the rim flange and automatically indents. When backing out, the roller moves away from the rim then out, to eliminate rim contact.
Bead Press Arm – The standard bead press arm assists in mounting difficult tires. The bead press arm is secured to the tool head controls and is cleared out of the way automatically as the tool head is raised.
Wheel Support Plate – Center clamps for maximum diameter flexibility. Adjustable to three working heights. Innovative Expandable Base – The three-position base provides the versatility to service wheels in ranges of 10” - 30”, 12” - 32”, and 14” - 34”. No expensive kits or modifications are required.
Wheel Lift – Eases the service of large wheel assemblies, reduces operator fatigue and allows for more careful handling of expensive reverse wheels. (Available separately as an optional add-on to the HUNTCA34.)

Includes

HUNRP6G10A80 RP6-G1000A80 Quick clamp center shaft with 90° lock
HUNRP6G10A67 RP6-G1000A67 Traction bar with extension and 28" bead depressor tail
HUNRP6713421 RP6-710013421 (2) wheel support plate guards for reverse wheels
HUNRP61157 Truck Cone
HUNRP6-3784 Mounting Paste, 3.5 kg
HUNRP6-1506 Applicator Brush
HUN2022361 Wheel Lift
HUNRP6G10A86 RP6-G1000A86 Mirror

Accessories

HUNRP6G10A89 RP6-G1000A89 Insert Ready Tool Head
HUNRP6G10A73 Pax Upgrade Kit

Warranty

Call the Hunter Customer Service Department at 1-800-448-6848 for specific warranty information.

NOTE: Because of continuing technological advancements, specifications, models and options are subject to change without notice.

Product Specifications

Approximate Shipping Weight: 1,100 lbs.
Bead Loosening Power (per arm): 2,645 lbs. @ 140 p.s.i.
Bead roller diameter range: 10"-30" / 12"-32" / 14"-34"
Bead roller power; each arm: 2,645 lbs. @ 140 p.s.i.
Clamping System Rotating Speed: CW - Variable up to 15 r.p.m. CCW - 7 r.p.m.
Electrical: 208-230 Volt 1 phase, 15 Amps NEMA L6-20P Plug
Max. bead loosening opening width: 15"
Max. bead roller opening width: 19"
Max. space dimensions: 68"L x 43"W x 72"H
Maximum tire diameter: 50" / 52" / 54"
Recommended air supply: 115-175 p.s.i.
Torque: 867 ft.-lbs.

To avoid damaging the TPMS sensor, always position the tire/wheel correctly according to the tire changer manufacture instructions. For the Hunter TC34, refer to the illustration shown above in order to position the tire/wheel.

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.