Item shown may not be actual product.
Product and price information are subject to change without notice.

Discontinued
Superseded to ROTA7IMP

Inbay® Express Service Lift (7,000 lb Capacity)

Item Number: ROTA7PIH Supplier: ROTARY LIFT

Description

Introducing the new Rotary model ROTA7PIH with inbay® technology for fast service applications. Rotary has worked closely with Honda to develop a lift that would improve productivity and allow dealers to increase the volume of vehicles being serviced in their facilities. This model has been enhanced from a standard lift incorporating features specifically requested by Honda with the idea of moving more cars through Express Service bays and increasing service revenues

Features

inbay® technology controls allow raising or lowering the lift from either side, eliminating the need to walk around the vehicle, saving several steps.
Drive-outer/drive-thru pad design allows quick vehicle positioning and removal. Requires no arms for adjustment.
(2) air outlets on each column provide conveniently located attachments for tire inflaters and impact wrenches right at the lift. Also includes an air shutoff valve.
110 volt electric outlets on both columns for convenient plug-in right at lift column.
Wheel hooks allow convenient placement of tires, preventing the need for the technician to bend over after removing tire and lifting the tire when reinstalling.
Magnetic lug nut trays allow convenient storage after lug nuts are removed.
Rubber spacer blocks allow proper vehicle lifting. Retainers at column base for convenient storage. (3) different heights provided.
True asymmetrical rotated columns for maximum door opening clearance, overhead cutoff device which prevents vehicle from contacting overhead beam, "double-S" column design which maximizes bearing surface contact area and easy to use arm restraints.
Holsters conveniently located on both columns for all air/power tools.
Power unit designed by Rotary®, specifically for lift applications
Patented (US Patent No 5,009,287) column design. “Double-S” shape, with single-piece construction to maximize strength and bearing surface area. Slider-block bearings of Tivar® polyethylene are self-lubricating and maintenance free
High-pressure cylinders in each column provide maximum lifting force
Overhead padded switch bar prevents damaging vehicles from being raised too high
Fixed-pad vehicle-contact area for quick vehicle spotting. Sized to fit all Honda and Acura models
Door Defender™ rubber door guard mounts to lift carriage and prevents vehicle door dings

2006 TechShop Top 5 Tools Award

Includes

Power unit (operates on 220-volt, single-phase power)
Patented column design
Maintenance-free bearings
Lifting cylinders in each column
Overhead cut-off switch
Fixed-pad contact area
Dual lift controls
Holster for impact wrenches
JSP96745 Magnetic lug-nut retainers
ROTN823 Door Defender™ prevents door dings
ROTFJ2427 (4) 1-1/2" tall rubber spacer block (4 required; sold separately in quantities of 1 each.)
ROTFJ2428 (6) 3" tall rubber spacer block (4 required; sold separately in quantities of 1 each.)
ROTFJ6211 (4) 7" tall rubber spacer block
ROTFJ5000 Fixed-pad rubber replacement kit
(2) Front wheel hangers*
(2) Rear wheel hangers*

*The tire hangers are not interchangeable.

Warranty

Two years on parts / One year on labor.

This lift must be installed by a Rotary Authorized Installer (RAI) All warranties voided if installed by someone other than a Rotary Authorized Installer. Lift must be registered with Rotary Lift by a Rotary Authorized Installer who provides the installation date of equipment, warranty is then based on the Installation date. Otherwise, any warranty that is provided by Rotary is based on the Ship Date of equipment.

Product Specifications

Capacity: 7,000 lb. (3175kg)
Capacity (per arm): 1,750 lb (794 kg)
Motor: 2 hp
Optional: 3 phase electrical available
Pad dimension per pad: 288 sq. in. (1858 sq. kg.)
Speed of rise: 45 seconds
Voltage: 1 phase, 208 volt/230 volt

It is recommended that a rubber spacing block be used at each vehicle lift point to avoid possible damage to vehicle components that may be hanging lower than the vehicle lift point. For example: 2002 CR-V requires (2) of the tall rubber spacing blocks at each lift point so that the fuel tank guard does not come in contact with the pad.
As a rule of thumb, position the vehicle so the front lift points align with the front edge of the pads. NOTE: This does not apply to the S2000 because the lift point is set back.
1999 and later Odysseys require different lift points to be used on the rear. Follow these instructions: Align the front vehicle lift points to the front edge of the pad and place a tall spacing block on each side at the vehicle lift points. The rear vehicle lift points will not align with the pad; therefore, place (2) tall spacing blocks end-to-end along the pinch weld and as close as possible to the rear lift points.
Passports: This vehicle must be centered to the pad to have the subframe contact with pad. Use the tall spacers at contact points.

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.