Item shown may not be actual product.
Product and price information are subject to change without notice.

$14,282.00 *
*log in for dealer pricing

Shockwave Equipped Two-Post Lift w/ Adjustable Pad

Item Number: ROTSPOA7X Supplier: ROTARY LIFT

NOTE: Standard Lead-time 70-90 days.
Rotary Authorized Installer must install lift to prevent voiding the manufacturer's warranty.
Buyer must arrange to have a forklift on-site to unload if the lift is being sent directly to buyer's location.

Description

Rotary's Shockwave™ equipped technology has been incorporated into the design allowing the SPOA7X lift to go to full rise twice as fast as standard lifts. It also lowers twice as fast. The other highlighted feature is Spotline™ Laser Assist. This feature includes a laser that projects a beam through the center of the bay and provides the technician "a target" to assist in center the vehicle between the lift posts to ensure the vehicle's load will be evenly distributed when raising it on the lift. Features include: 7,000 pounds lifting capacity, wheel hangers, magnetic lug nut storage retainers, adjustable lifting platforms for different wheel bases, and three different sets of spacer blocks that provide additional clearance when lifting vehicles.

Features

Shockwave™ equipped technology with DC power system that allows the lift to reach full rise in 25 seconds (standard lifts had a 45-second rise time) and 19-second descent, about half the time it takes for standard lifts to go up and down.

Powered by two, Group 24, standard auto batteries (not included).

Lift requires only a 110 volt connection rather than 220 volt, reducing installation cost. The 110 volt operates a built-in battery charger. No individual circuit is necessary for each bay.

Spotline™ Laser shoots a beam through the center of the bay providing the technician a target when pulling the vehicle into the bay visible on the hood and dash. Motion sensor turns laser on and off to extend the laser's shelf life.

Adjustable lifting platform created to accommodate all Honda/Acura vehicles. The adjustable platform moves easily, is very low to the ground, and minimizes the time needed to properly spot the vehicle before lifting.

Two air outlets on each column may be used for tire inflators or air tools.

110 Volt outlets on each column for electric tools or other devices.

Durable magnetic lug-nut retainers provide a convenient location at any point on the lift to store lug nuts while tire rotations are being performed.

Three different spacer block sets are included for providing additional clearance needed for certain vehicles with new column-mounted storage trays.

Standard two-post features include true asymmetrical columns for maximum door-opening clearance, overhead padded switch bar to prevent vehicles from being raised too high and "Double-S" column design which maximizes bearing surfaces contact area.

Tool holder on each column to hold the impact wrenches and tire inflators.

Includes

ROTFA5959    (4) Magnetic Lug Nut Retainers

ROTN823        (2) Door Defender™ Cushions - prevents door dings (sold separately in quantities of 1 each)

ROTFJ2427    (4) 1-1/2" Tall Rubber Spacer Blocks (4 required, sold separately in quantities of 1 each)

ROTFJ2428   (4) 3" Tall Rubber Spacer Blocks (4 required, sold separately in quantities of 1 each)

ROTFJ6211    (4) 7" Tall Steel Spacer Blocks

ROTFA5191    (2) Tool Holders (sold separately in quantities of 1 each)

ROTFJ5000     Rubber Pad Replacement Kit

ROTFJ24271   (4) Spacer Block Storage Trays (sold separately in quantities of 1 each)

                      (4) Heavy-Duty Wheel Hangers*

*NOTE: Wheel hangers have gone through several modifications and upgrades since being introduced. Please contact your program service representative for guidance identifying the appropriate replacement parts. Your program service representative will need the lift serial number to assist with identifying the appropriate replacement parts and pricing. For assistance locating the serial number on your lift, go to the Online Catalog and search for "wheel hanger."

Options

SmartLift Shockwave Upgrade Packages: Upgrade Your Existing SmartLift to Shockwave!
If the extra-fast speed of rise, quick descent and Spotline laser spot assist all sound like appealing features to you, it is possible to upgrade your existing Rotary SmartLift to a Shockwave equipped unit. Contact a program representative (with your lift serial number and lift control mounting method) to check if your unit can be upgraded and confirm pricing.
The upgrade package includes two new hydraulic cylinders, a new power unit and the Spotline laser spot assist. Batteries are not provided. NOTE: In addition to bench-mounted controls, both the standard wall-mounted controls and pedestal-mounted controls are available. All pedestal-mounted controls must be requested at the time of order for the SmartLift Shockwave Upgrade Package.

SmartLift Express Service/Accelerated Service Retrofit Packages: Retrofit Your Existing SmartLift to an Adjustable Pad Lift
It is possible to retrofit your existing Three-Stage Arm SmartLift to an Express Service/Accelerated Service Adjustable Pad Lift including the Wheel Hangers, Magnetic Lug Nut Storage Retainers, Adjustable Low-Profile Lift Platforms, and Three Sets of Spacer Blocks. Contact a program representative (with your lift serial number) to check if your unit can be retrofitted and confirm pricing.

Warranty

Two years on parts / One year on labor

NOTE:This lift must be installed by a Rotary Authorized Installer (RAI). All warranties are voided if installed by a company or individual that is not an RAI. Lift must be registered with Rotary Lift with the date the lift went into operation, and the start of the warranty is based on that date. If the lift is not registered, the warranty period is determined by and begins on the ship date of the equipment.

Product Specifications

Drive Over Clearance: 2-5/8" (67 mm)

Drive-Thru Clearance: 78-1/2" (1994 mm)

Floor to Overhead Switch: 135" (3429 mm)

Height Overall: 140-1/2" (3569 mm)

Inside of Pad to Inside of Pad: 39-7/8" (1013 mm)

Lifting Capacity: 7,000 lbs. (3157 kg)

Lifting Capacity (per platform): 3,500 lbs. (1588 kg)

Motor Performance: 2 hp

Outside of Pad to Outside of Pad: 78-1/2" (1994 mm)

Pad Length Fully Extended: 87-1/4" (2016 mm)

Pad Length, Fully Retracted: 71-1/8" (1807 mm)

Rise (measured to top of pad): 76-5/8" (1947 mm)

Speed of Rise: 25 seconds

Voltage Single Phase: 110 Volts

Width Between Columns: 107-1/4" (2462 mm)

Width Overall : 137-3/8" (3490 mm)

Serial Number Verification

The item you are attempting to add to your cart requires a serial number verification first. Please enter the Key Machine serial number below to continue.

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.