Home | Order History | SiteImages/NoImage.gif Shopping Cart | Help

Program Info Equipment Catalog What's New Suppliers
HONDA Dealers: Please enter the site from the iN or eMall system for dealer specific content and pricing
Item Detail

Table of Contents Alignment, Wheel, and Brake Equipment Alignment Lift Racks and Accessories

Image shown above may not
be the actual product.
Product and price information are
subject to change without notice.

14K Short Bay ScissorAlignment Surface-Mount
Model: EELR587A

Click arrow for additional options:
Supplier Name: JOHN BEAN
Price: $25,512.00



John Bean Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.


  • 14,000 lb. lifting capacity
  • Open front and rear access between lifting platforms
  • Low profile height with long approach ramps easing drive on
  • Wide drive on runway platforms improves ease of vehicle positioning
  • Recessed front turn plate pockets and full floating rear slip plates give a uniform surface for alignment
  • Maintenance reduced rear slip plates use oversized encapsulated bearings, roll upward protected from environment debris
  • Re-enforced scissor / base structure and runway platforms improves alignment accuracy
  • Multi-position work step provides comfortable under hood access
  • 4 hydraulic cylinders, cross aligned arrangement provides secure lift power and added safety
  • Contained top and bottom durable steel re-enforced glide blocks deliver smooth lift operation
  • Up to 18, level locking locations improves ergonomic working positions
  • Approach ramps are equipped with end sliders minimizing noise and reducing floor damage
  • Adjustable maximum lift height, suiting locations with low ceilings
  • Safety systems include:
    • Mechanical locking with pneumatic safety lock release form control console
    • Flow sensing valves in hydraulic control circuit
    • Redundant hydraulic safety system with cross aligned hydraulic circuits
    • Integrated hydraulic fuse protection, preventing inadvertent lowering in the event of a hydraulic line leak
    • Lock pins to secure against slip plate movement when loading/unloading vehicles
    • Wheel chocks, front wheel stops and self-activating rear wheel stop preventing roll offs
  • Integrated air kit allows unrestricted clear access for operation of rolling jacks
  • On-board FRL; (Filter, Regulator, Lubricator) provides clean and lubricated air, reducing maintenance and protecting pneumatic
  • All models have been tested and validated by an independent third party to the ANSI/ALI automotive lift standard, ALCTV-2011


One year

Product Specification

2 Wheel Alignment Wheelbaseup to 165" (4191 mm)
4 Wheel Alignment Wheelbase88" (2235 mm) - 155" (3937 mm)
Console Dimensions (D x W x H)16-1/2" x 14-1/8" x 45-3/4" (419 x 359 x 1162 mm)
General Service Wheelbaseup to 179" (4547 mm)
Hydaulic Oil CapacityTank Size: 4.0 gal. (15L) / Lift Capacity: 6.0 gal. (22.7L)
Hydraulic Oil TypeISO 32 (10 weight) hydraulic oil
Lift Time (based on full load)75 - 85 seconds
Maximum Capacity14,000 lbs. (6350 kg)
Maximum Operating Pressure4600 PSI (31.7 MPa)
Maximum Raised Height72" (1829 mm)
Minimum Lowered Height10" (254 mm)
Overall Length256.19" (6507 mm)
Overall Width (min. max)92-1/2" (2350 mm) - 94-1/2" (2400 mm)
Pneumatic Filtration Oil TypeSnap-on # IM6 or Equivalent
Power Rating (at the lift)230V, 1Ph, 60Hz, 20A
Runway Width26" (660 mm)
Width Between Runways38" (965 mm) - 40" (1016 mm)

Home | What's New | Program Information | Order History | Contact Us | Privacy Policy | Site Map

By accessing and using this web site, each user agrees that they have read and agreed  to be bound by the Terms and Conditions governing this site.
All the contents of this website are copyright  by Equipment Solutions, a Division of IDSC Holdings Inc.(DBA "Snap-on Business Solutions"). All rights reserved.
. .